ArduIMU (385)

Discussions Replies Latest Activity

arduimu & easyglider

Hi, anyone flying adupilot&arduimu with an easyglider ?  Can someone supply me with a header file with the gain values pre-tuned for t…

Started by Sebastian Boehm

0 Jun 1, 2010

GPS & IMU

If I am using the IMU is it necessary to plug the Ublox GPS into that board or can it plug into the shield? If I plug it into the IMU the I…

Started by John Klier

13 May 31, 2010
Reply by Dr Mike Black

Hi Jose, Jordi and all, could you help me out on the PPM recording issue?

Hello Jose, Jordi and All:            Could you help me out on the PPM recording issue?            Basically, I wanna follow Julio's Quad I…

Started by Alex

0 May 31, 2010

Arduimu with 4 stroke Saito (vibrations)

My setup is Ardupilot 2.6, IMU, Ublox, Xbee pro 900 mhz, kyosho calmato 60 sport trainer (aprox 8 lb) 4 stroke saito 100 and 24 oz fuel tan…

Started by Rafael D.

4 May 26, 2010
Reply by Nathaniel Caner

Ardu IMU and drift

Hi, The ArduIMU seems to be a very good product and I have a small question about it. What kind of drift can be expected of it if the IMU…

Started by Phil G

7 May 25, 2010
Reply by Ken

no gps data......

i bought the arduimu v2 flat,the EM406 gps,the connector,the cable and the ftdi cable.i connected them right with "clear sky" but the gps d…

Started by tais

22 May 22, 2010
Reply by tais

Problem in firmware uploading for ArduIMU ver2

Hello All:         I need an urgent help on the firmware uploading for ArduIMU ver2. The main problem is when I upload the firmware, Arduin…

Started by Alex

10 May 20, 2010
Reply by Benjamin Lanehart

How do I tell what firmware number I am using, And which one is "1.6" ?

Is there a version number in the code somewhere? Its not immediately obvious to me.Also I am using the demo prog, and I understand it doesn…

Started by wilsonj

4 May 18, 2010
Reply by wilsonj

Question: What pin Arduimu V1 -> connects to Ardupilot D6

I would like to connect the Arduimu V1 to my Ardupilot. I do not know where to connect AP pin D6 on the ArduImu V1.   Who can help?   Thank…

Started by Christof Schmid

3 May 16, 2010
Reply by Mark Colwell

Question about demo with arduIMU and gps

I have a ublox GPS hooked up to my arduIMU and I have the demo running with the labview runtime engine. After my gps gets a lock, my compas…

Started by Taylor Cox

5 May 14, 2010
Reply by Chris Anderson

RSS

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service