Olivier ADLER's Discussions (797)

Discussions Replied To (767) Replies Latest Activity

Developer

"For programmers who like to try funny things, it should be possible to use the Mega…"

Olivier ADLER replied Dec 2, 2013 to ArduCopter-3.0.1 released!

5009 on Saturday
Reply by Rodrigue Amyot

Developer

"Hi Dave. You have to manually save the value and disable tuning to keep the value.…"

Olivier ADLER replied Nov 29, 2013 to ArduCopter-3.0.1 released!

5009 on Saturday
Reply by Rodrigue Amyot

Developer

"That's a good news Detlef. The 5V is a bit scary, is it your ESC that is doing this…"

Olivier ADLER replied Nov 6, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

"The servo was not working because the PWM output is very fast. 490 Hz is the defaul…"

Olivier ADLER replied Nov 1, 2013 to Varibale pitch Quadcopter APM help needed

2 Nov 1, 2013
Reply by Fred Briggs

Developer

"Bruce, Detlef, this is finally a happy end. Thanks for your testing efforts. The p…"

Olivier ADLER replied Nov 1, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

Developer

" Yes Randy, 3V3 is here on the APM 2.0."

Olivier ADLER replied Nov 1, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

Developer

"You did not notice it but it was a dangerous situation that could have induced a cr…"

Olivier ADLER replied Nov 1, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

Developer

"Sure, but the MPU6000 and or MS5611 could have been partially damaged by the over v…"

Olivier ADLER replied Nov 1, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

Developer

"That's a nice news ! I think that we should do a small hardware modification on th…"

Olivier ADLER replied Nov 1, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

Developer

"Sorry i should have said that it's important for manufacturers to deliver good qual…"

Olivier ADLER replied Oct 31, 2013 to AC3.1 & blown 3.3V regulator (was AC3.1-rc5 SPI speed problem)

985 Apr 8
Reply by Randy

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service