Andrew Adams's Discussions (109)

Search Forum

View

Discussions Replied To (92) Replies Latest Activity

"They do the normal startup blinking. I can then "arm" the board and the green led go…"

Andrew Adams replied May 6, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"So I agree that it isn't the code or wiring. Just to make sure I did everything rig…"

Andrew Adams replied May 6, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"I can arm it now, but since I'm upgraded to the newest firmware, the ESCs continuall…"

Andrew Adams replied May 6, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"Strange. I have it set up correctly for my planes but not the copter. Regardless, ju…"

Andrew Adams replied May 4, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"Tried trimming down the throttle...no dice. Not sure where to go from here. May try…"

Andrew Adams replied May 4, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"Havent tried that. I did set the mix for the channel to -125% I'll give the trimming…"

Andrew Adams replied May 3, 2012 to Unable to arm hexa

 18 May 10, 2012
Reply by Andrew Adams

"A quick search turned up this post...http://www.rcgroups.com/forums/showthread.php?t…"

Andrew Adams replied Apr 30, 2012 to How can we conect the brushless motors to the speed control ?

 19 Apr 30, 2012
Reply by Juan Sebastian Otalora Acevedo

"If you were expecting to build a tricopter with just the stuff listed above, you wer…"

Andrew Adams replied Apr 30, 2012 to How can we conect the brushless motors to the speed control ?

 19 Apr 30, 2012
Reply by Juan Sebastian Otalora Acevedo

"As far as I know, and I'm no expert, you'll need an ESC for each motor. Connectors.…"

Andrew Adams replied Apr 30, 2012 to How can we conect the brushless motors to the speed control ?

 19 Apr 30, 2012
Reply by Juan Sebastian Otalora Acevedo

"Do you still have this?"

Andrew Adams replied Apr 18, 2012 to For Sale: PhotoShip One mkTR camera camera gimbal

 7 May 24, 2012
Reply by Istvan Tamas

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 Drone shot down by police

Drone shot down by police
8 MAAT final version is being tested

MAAT final version is being tested
9 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
10 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service