Dave C's Discussions (850)

Search Forum

View

Discussions Replied To (817) Replies Latest Activity

"When you move about the air rushing around the airframe causes turbulence, either i…"

Dave C replied 15 hours ago to Arducopter Tuning Guide

 519 4 hours ago
Reply by João Victor Fortes Carvalho

"HI, sorry mad busy at the moment so no real time to help. But, that horrible flying…"

Dave C replied yesterday to Arducopter Tuning Guide

 519 4 hours ago
Reply by João Victor Fortes Carvalho

"Yup this sounds like ESC cal.  Go into mission planner, calibrate your radio. Disc…"

Dave C replied Jun 2 to Motors are super weak! Please help.

 13 Jun 2
Reply by Kabir

"Go to config/advanced parameters/advanced list, then click save on the right hand si…"

Dave C replied Jun 1 to How to completely clone settings

 5 Jun 2
Reply by Jared Reabow

"Oh yeah, the yaw problem, have you done the compassMOT in CLI? That will defo help.…"

Dave C replied May 30 to Two different quad, two different problems

 10 May 30
Reply by Euan Ramsay

"Schweet. They are some super stable machines you have there, great work!  Any chanc…"

Dave C replied May 30 to Two different quad, two different problems

 10 May 30
Reply by Euan Ramsay

"Well spotted, this is a known bug, under going testing. Will be in RC4!"

Dave C replied May 30 to RC3 Climb Rate during Auto?

 2 May 30
Reply by criro1999

"Hi Euan,  Quad 1 - strange. you haven't got anything unusual programmed in your TX…"

Dave C replied May 28 to Two different quad, two different problems

 10 May 30
Reply by Euan Ramsay

3D Robotics

"+1 on this. I tried to arm without compass. no joy. Good. I then connected compass…"

Dave C replied May 27 to APM Copter 2.9.1.b has been released

 1272 22 hours ago
Reply by Andreas Breitenstein

3D Robotics

"Are we talking ascent in manual modes (arco/stab) or auto? I reckon mine does 35-50…"

Dave C replied May 27 to APM Copter 2.9.1.b has been released

 1272 22 hours ago
Reply by Andreas Breitenstein

RSS

Social Networking

Top Content 

1 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
2 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
3 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 How to succeed without really trying

How to succeed without really trying

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service