Chris Pitts's Discussions (123)

Discussions Replied To (74) Replies Latest Activity

"My first guess is that it would basically be multiplying the first constant by the s…"

Chris Pitts replied Oct 25, 2012 to How to tune a rate PID

15 Dec 1, 2013
Reply by Rob_Lefebvre

"The Raptor 90 I'm using belongs to my controls lab, and I'm not sure replacement par…"

Chris Pitts replied Oct 25, 2012 to Moving to a flybarred Raptor 90 from my TREX 450 FBL.

20 Nov 1, 2012
Reply by Chris Pitts

"Ok thanks for the confirmation on that. I'll see if I can find the manual for the Al…"

Chris Pitts replied Oct 24, 2012 to Lost throttle control on landing and broke my skids. Any tips?

2 Oct 24, 2012
Reply by Chris Pitts

"Wow! That is super nice. I figured that was probably a silly question.  "

Chris Pitts replied Oct 24, 2012 to pid diagram ?

13 Nov 1, 2012
Reply by bruno lafond

"Does stabilize mode also work with flybar helis in this mode? I have a Raptor 90 I'd…"

Chris Pitts replied Oct 24, 2012 to pid diagram ?

13 Nov 1, 2012
Reply by bruno lafond

"I see, so it's still a second order controller, but the damping is pushed in in a di…"

Chris Pitts replied Oct 24, 2012 to How to tune a rate PID

15 Dec 1, 2013
Reply by Rob_Lefebvre

"Make that a TREX 450* Not sure why I can't edit the original post."

Chris Pitts replied Oct 24, 2012 to Moving to a flybarred Raptor 90 from my TREX 450 FBL.

20 Nov 1, 2012
Reply by Chris Pitts

"I haven't researched FBL controllers, so I can't say what methodology they use, but…"

Chris Pitts replied Oct 23, 2012 to How to tune a rate PID

15 Dec 1, 2013
Reply by Rob_Lefebvre

"The 2.8 code has not yet been published for traditional helis, AFAIK. 2.7.3 is the l…"

Chris Pitts replied Oct 23, 2012 to pid diagram ?

13 Nov 1, 2012
Reply by bruno lafond

Moderator

"I STRONGLY concur with Randy here. I fly a TREX 450 Pro V2 3GX. I was feeding the 6V…"

Chris Pitts replied Oct 22, 2012 to APM2 No servo movement

6 Oct 22, 2012
Reply by Chris Pitts

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service