Anderl's Discussions (112)

Discussions Replied To (65) Replies Latest Activity

"If you want to control some led strips, a easier way is to use this board. Here are…"

Anderl replied Nov 3, 2013 to Learn how to modify the code

6 Nov 3, 2013
Reply by Anderl

"Hola Jorge, At the beginning of config.h appears the following statement: // WARNING…"

Anderl replied Nov 2, 2013 to Learn how to modify the code

6 Nov 3, 2013
Reply by Anderl

"Hola Jorge, que tal? Check this link: http://vcctoground.com/tutorials/changing-the-…"

Anderl replied Nov 1, 2013 to Learn how to modify the code

6 Nov 3, 2013
Reply by Anderl

"Yes. This point was extensively discussed about here, http://diydrones.com/forum/top…"

Anderl replied Jul 15, 2013 to How to setup FailSafe for Arducopter with Turnigy 9x stock firmware?

15 Mar 28
Reply by Brad Roekle

Developer

"Hi Randy, Yes I wanted to tune some PIDs using channel 6. Unfortunately, I had no ti…"

Anderl replied Jul 8, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

Developer

"Hi Igor, thanks for your reply. New calibration?, http://diydrones.com/forum/topics/…"

Anderl replied Jul 7, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

Developer

"Yes, unfortunately I forgot to turn on the motors on the logs. Really, I don´t know…"

Anderl replied Jul 7, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

Developer

"Maiden flight today with the V3.0.1-rc1. I opened gas to take off and, suddenly, the…"

Anderl replied Jul 7, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

Developer

"Yes, I also do this so, but this solution doesn't seem practical, because it greatly…"

Anderl replied Jul 7, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

Developer

"Thanks"

Anderl replied Jul 7, 2013 to ArduCopter-3.0 ready for wider use

1569 Apr 4
Reply by leopoldo ojea

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service