estebanflyer's Discussions (134)

Search Forum

View

Discussions Replied To (120) Replies Latest Activity

"So I got Mission Planner to open up. I'm running Ubuntu 12.04 and Mission Planner 1.…"

estebanflyer replied Jun 12 to Mission Planner 1.2.38+ on Ubuntu Linux with mono

 3 Jun 12
Reply by estebanflyer

Moderator

"research on something like:  chmod 777. it changes the serial permissions to read an…"

estebanflyer replied Jun 10 to 3DR radio with Ubuntu?

 6 Jun 10
Reply by estebanflyer

"I installed John Leach's package and showed an error at start up. the program opens,…"

estebanflyer replied May 25 to Mission Planner 1.2.38+ on Ubuntu Linux with mono

 3 Jun 12
Reply by estebanflyer

"dont forget about gopro's anti shock case...it would be cool to build a 3D printed p…"

estebanflyer replied Apr 21 to Ditch the GoPro, it's the Canon SD1400is !

 40 Jun 10
Reply by Jim White

"I needed to know what each did better. I wasnt sure what the FrSky did. now I know."

estebanflyer replied Feb 8 to Is safe flight possible with diydrones gear?

 50 Feb 8
Reply by estebanflyer

"I see!! Frsky is for flying and telemetry, while 3dr is only telemetry. great. thank…"

estebanflyer replied Feb 8 to Is safe flight possible with diydrones gear?

 50 Feb 8
Reply by estebanflyer

"Hello Mark, I have been trying to understand the differences between 3DR and FrSky a…"

estebanflyer replied Feb 7 to Is safe flight possible with diydrones gear?

 50 Feb 8
Reply by estebanflyer

"that play is normal. if you pound it too much, you are gonna end up pressing the bal…"

estebanflyer replied Aug 29, 2012 to 880kv jdrones & ddr store set slack and hex screw size

 4 Aug 29, 2012
Reply by estebanflyer

Developer

"What I do is unplug the xbee, plug the battery, wait 10 seconds and then plug the xb…"

estebanflyer replied Aug 13, 2012 to ArduCopter 2.7.1 Released

 442 Feb 24
Reply by I.S.

Developer

"That use to happen to me, and i thought it got fixed in 2.7.1. I had me xbee get bri…"

estebanflyer replied Aug 12, 2012 to ArduCopter 2.7.1 Released

 442 Feb 24
Reply by I.S.

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 Drone shot down by police

Drone shot down by police
8 MAAT final version is being tested

MAAT final version is being tested
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 Thirty Days (#28): McMaster-116 lift

Thirty Days (#28): McMaster-116 lift

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service