jbabio's Discussions (24)

Discussions Replied To (17) Replies Latest Activity

"Hi, I have no time last week to try but today I've upgraded to 1.2.20 on startup and…"

jbabio replied Nov 15, 2012 to MAVLINK not connecting in windows8 (Xbee)

6 Nov 15, 2012
Reply by jbabio

"No one getting same error?"

jbabio replied Nov 13, 2012 to MAVLINK not connecting in windows8 (Xbee)

6 Nov 15, 2012
Reply by jbabio

"Errata: I wrote "power came straight from the BEC" but was intended to be "power cam…"

jbabio replied Oct 15, 2012 to ArduPlane won't arm engine

33 Jul 14, 2014
Reply by Hayes Perkins

"Hi, I had same issue time ago with my octo with HiModel Professional 40A ESCs. The…"

jbabio replied Oct 15, 2012 to ArduPlane won't arm engine

33 Jul 14, 2014
Reply by Hayes Perkins

"Thank you, for the explanation. Since my DIY antenna is bare copper, 31,25mm in leng…"

jbabio replied Oct 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

"Thank you for your help Martin, I was sure the original was shorter than 31mm but di…"

jbabio replied Aug 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

"If the Xbee is undamaged I would remove the broken RPSMA connector and replace it wi…"

jbabio replied Aug 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

"I've finally cut a section of wire from TV antenna cable 31,25mm in length, soldered…"

jbabio replied Aug 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

"I'm assuming they have measured the length of the standard Xbee antenna. Could the E…"

jbabio replied Aug 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

"I've asked the same question to the store where I've purchased The Xbees (buildyouro…"

jbabio replied Aug 13, 2012 to 2.4Ghz Xbee Pro S1 - Antenna replacement

13 Oct 24, 2012
Reply by Søren Kuula

RSS

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service