James Friend's Discussions (33)

Search Forum

View

Discussions Replied To (31) Replies Latest Activity

"Hi Bill  My apologies if someone else has suggested this already, or you are already…"

James Friend replied Nov 7, 2012 to Fly aways the failsafe and the 9x

 126 Nov 9, 2012
Reply by TFS Aeronautical Robotics Club

Developer

"Theo it's a long shot, but perhaps try doing individual throttle calibration on each…"

James Friend replied Jun 7, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Hi Stu Sorry to hear. Was afraid it may prove to be an intermittent problem, and I…"

James Friend replied May 29, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Hi Stu I have not yet flown since the crash - between work and weather there hasn't…"

James Friend replied May 28, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Hi Chris I would leave all on default except timing. Default timing is low (accordin…"

James Friend replied May 25, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Hi Guys, here is my log of similar problem (see my 1st reply to Stubugs post)  Firmw…"

James Friend replied May 22, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Thanks Marco, that makes more sense!"

James Friend replied May 22, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

Developer

"Hi there, had exactly the same on Friday. Latest code as of Thursday 22 May (2.5.5?)…"

James Friend replied May 21, 2012 to ArduCopter 2.5 released!

 1708 Dec 21, 2012
Reply by Emin Bu

"Hi Vernon Looking at the RCTIMER link you supplied above, the Image of the ESC and…"

James Friend replied May 17, 2012 to New to this and building my first rig, comment please!

 26 Jul 21, 2012
Reply by John Grouse

"Removing props is usually not difficult, never tried tying my quad down, so no idea…"

James Friend replied May 17, 2012 to New to this and building my first rig, comment please!

 26 Jul 21, 2012
Reply by John Grouse

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
3 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 How to succeed without really trying

How to succeed without really trying

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service