Al Ros's Discussions (94)

Search Forum

View

Discussions Replied To (80) Replies Latest Activity

"Obvious questions, but you guys are in in x mode with the mega board between the fro…"

Al Ros replied May 9, 2011 to Beta + or x?

 18 May 10, 2011
Reply by davidbuzz

"Thanks   in CLI mode when you type compass are your x,y,z offset 0,0,0 or have they…"

Al Ros replied May 8, 2011 to Mag orientation and offsets

 11 May 9, 2011
Reply by Vincent Mees

"Folks   My issue is not that the compass is reading the heading incorrectly. My loca…"

Al Ros replied May 8, 2011 to Mag orientation and offsets

 11 May 9, 2011
Reply by Vincent Mees

"Thanks Clement   My mag is soldered to the oilpan with a header - so I presume I don…"

Al Ros replied May 8, 2011 to Mag orientation and offsets

 11 May 9, 2011
Reply by Vincent Mees

"Awesome   Just been searching on this issue to try and clean up yaw sloppiness. Can'…"

Al Ros replied Apr 26, 2011 to Yaw control suggestion...

 3 Apr 26, 2011
Reply by Al Ros

"could your transmitter have been in altitude or GPS hold position when you activated…"

Al Ros replied Apr 24, 2011 to Having trouble maintaining controlled flight

 6 Apr 26, 2011
Reply by Christopher Cooper

"This is excellent - tested and works great   thanks for posting this   Al"

Al Ros replied Apr 18, 2011 to Ublox to UCenter (APM bypass)

 4 Apr 18, 2011
Reply by Al Ros

"Thanks Guys !! ready to test fly - if only the Canadian "spring" weather would coope…"

Al Ros replied Apr 16, 2011 to Magnetometer "disabled"

 8 Apr 16, 2011
Reply by Al Ros

"Warren,   Thanks I think that's it. I tried "compass on" and It looks like it is wor…"

Al Ros replied Apr 15, 2011 to Magnetometer "disabled"

 8 Apr 16, 2011
Reply by Al Ros

"Hi Chris   Thanks for quick response. Solder connections are good and I traced conti…"

Al Ros replied Apr 15, 2011 to Magnetometer "disabled"

 8 Apr 16, 2011
Reply by Al Ros

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 ArduPlane 2.73 released

ArduPlane 2.73 released
3 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
4 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
5 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
6 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
7 DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)

DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
8 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
9 HD video for UAV's

HD video for UAV's
10 Thirty Days (#13): Y6 in-flight motor failure tests

Thirty Days (#13): Y6 in-flight motor failure tests

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service