Aerhead's Discussions (55)

Discussions Replied To (44) Replies Latest Activity

"I cleaned and inspected the 3D radio with a 10x stereo microscope.  There was some o…"

Aerhead replied Oct 30, 2012 to 3D Air module Red LED on solid

4 Oct 30, 2012
Reply by Aerhead

"Andrew I'm using the 3D radios on a APM 2 octo and a Autoquad octo at 115k baud. I…"

Aerhead replied Oct 30, 2012 to 3D Air module Red LED on solid

4 Oct 30, 2012
Reply by Aerhead

"Andrew Greatly appreciate the information.  I had the the radio covered with heat s…"

Aerhead replied Oct 30, 2012 to 3D Air module Red LED on solid

4 Oct 30, 2012
Reply by Aerhead

"R There are a few ESCs that are 6S and have a good governor. http://www.hobbyking.co…"

Aerhead replied Sep 13, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"R If you want to get a real accurate RPM controlling ESC the ESC32 would probably b…"

Aerhead replied Sep 11, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"Dan  A year ago I ordered a few heli ESC and I found one that worked OK.  Most ESC w…"

Aerhead replied Sep 8, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"Jonathan The VPP quad has been done by MIT and GAUI in TaiwanMIT used four motors a…"

Aerhead replied Sep 2, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"Dan To get this to fly I would 1. Connect all four motor ESC together and control th…"

Aerhead replied Sep 1, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"2.5 kg is a bit heavy for a 10" quad but it should fly ok.  I could not see that the…"

Aerhead replied Aug 31, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

"There are a lot of helicopter parts put together very nicely here.  Look very strong…"

Aerhead replied Aug 31, 2012 to variable pitch quad

43 Sep 13, 2012
Reply by Aerhead

RSS

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service