Greg's Discussions (46)

Discussions Replied To (28) Replies Latest Activity

"Thanks for the advice.  I've got it working."

Greg replied Oct 15, 2015 to Dual GPS question

3 Oct 15, 2015
Reply by Greg

"Did this setup work for you?  I've been struggling to get a PWM signal from CH8 to R…"

Greg replied May 8, 2015 to Pixhawk use of AUX pin (55) to switch navigation light

22 Feb 26
Reply by alan Smith

"And just so I understand, the zener is connected alone, across the pos and neg outpu…"

Greg replied Jan 8, 2015 to Pixhawk total power failure in flight

4 Jan 8, 2015
Reply by Thomas J Coyle III

"My power supply for the power module plug is going through an Attopilot 180 pulling…"

Greg replied Jan 8, 2015 to Pixhawk total power failure in flight

4 Jan 8, 2015
Reply by Thomas J Coyle III

"Anyone?  Based on some reading on the forum it seems like maybe the board voltage is…"

Greg replied Sep 23, 2014 to Low board voltage issue

1 Sep 23, 2014
Reply by Greg

"My custom hex did that not long ago.  Best I can tell, a bad XT60 connector was crea…"

Greg replied Sep 23, 2014 to Pixhawk wierd glitch

1 Sep 23, 2014
Reply by Greg

"Have you tried it without the sonar?  I was using sonar on my custom hex with APM2.6…"

Greg replied Sep 23, 2014 to Pixhawk & Sonar

19 Feb 3, 2015
Reply by Thomas J Coyle III

"No, I use this module https://www.sparkfun.com/products/10644 That's what I mean by…"

Greg replied Jul 17, 2014 to Battery spark wiping out EEPROM?

8 Jul 17, 2014
Reply by Greg

"Ian, it turned out to be the optical sensor. I eliminated that and the problem stopp…"

Greg replied Jul 16, 2014 to Battery spark wiping out EEPROM?

8 Jul 17, 2014
Reply by Greg

"OK, I just realized the barometer is reading distance above sea level, not ground le…"

Greg replied Apr 8, 2014 to Need help with altitude sensors

1 Apr 8, 2014
Reply by Greg

RSS

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service