Søren Kuula's Discussions (631)

Discussions Replied To (587) Replies Latest Activity

"Randy, Randy, why would Vcc sag under loading of the battery? Vcc is after the volta…"

Søren Kuula replied 2 hours ago to 3DR Power Module not very accurate - What should I expect?

9 1 hour ago
Reply by thomas Butler

"Hi, is there any chance the APM might have come loose, simply? RSSI indicators are n…"

Søren Kuula replied on Monday to Kerosene jet with Arduplane crash analysis

17 on Monday
Reply by Adam Erickson

"Aaaaah .. no. It crashed again before I got so far :("

Søren Kuula replied Apr 10 to Does ArduCopter work well with negative above-start-location altitudes?

5 Apr 10
Reply by Raúl Edo

"Hi, Okay I think we have pretty much gotten to the bottom of it. The Tx should be on…"

Søren Kuula replied Apr 6 to Extreme servo travel on APM 2.5 boot

6 on Thursday
Reply by Ted Van Slyck

"If your motors stop completely at 12 hundred and something, could that be the cause?…"

Søren Kuula replied Apr 6 to LOITER and RTL crashing bug

118 Apr 10
Reply by Jay Galleno

"Hi, It's probably just the random noise in the GPS position and the plane being very…"

Søren Kuula replied Apr 5 to APM 2.5 Channel 1 servo twitching in LOITER

1 Apr 5
Reply by Søren Kuula

"Hi, The code looks real good, actually. There are no "too many defaults fighting to…"

Søren Kuula replied Apr 5 to Extreme servo travel on APM 2.5 boot

6 on Thursday
Reply by Ted Van Slyck

"That one pictured above typically comes with a not quite authorized copy of the Alex…"

Søren Kuula replied Apr 5 to gimbal for 3dr x8

16 Apr 6
Reply by Mark Blom

"Hi, that bothers me too. Im going to have a look at the code..."

Søren Kuula replied Apr 5 to Extreme servo travel on APM 2.5 boot

6 on Thursday
Reply by Ted Van Slyck

"Hi, thanks, and sorry that was a little silly a question I asked. I just thought of…"

Søren Kuula replied Mar 30 to Pixhawk only likes to flip and crash.

6 Mar 30
Reply by Søren Kuula

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service