Replies to This Discussion

Permalink Reply by Rui Manuel Cravo Marques on August 14, 2011 at 2:34pm

I've uploaded now to my Quad. One thing I noticed is that the artificial horizon is all around even after level from APM Planner and level from RC Sticks (full down throttle and full left yaw). Tryied with XBees and horizon was OK. Reconnected with USB, after restarting APM Planner (ver. 1.0.53) and it was OK too. Maybe some glitch for not having it restarted. One thing I noticed (didn't tested it in previous versions), is that while in auto trim mode, flight modes could be changed, shouldn't the ohter modes be locked until auto trim ended ? Also I would like know why, in HUD, on the right side on what I believe to be the absolute altitude info bar, sometimes there's a bar beeing filled in blue color, what is that ? Is there any place describing all the HUD gadgets and bars ?

 

• ▶ Reply

Permalink Reply by Matt Gaige on August 14, 2011 at 3:12pm

It looks as if it is still loading .38, though it states .39.

• ▶ Reply

Permalink Reply by Nigel Conliffe on August 14, 2011 at 7:13pm

Where are you finding 2.0.39?

All I see here http://code.google.com/p/arducopter/downloads/list  is .38

 

(pf course, by the time I write this, some clever person will have updated the download page and I'll look like an idiot.  Again.  :) )

 

N

• ▶ Reply

Permalink Reply by Matt Gaige on August 14, 2011 at 7:38pm

It appears in the Mission Planner under Firmware, when you select "Quad" it asks if you wish to load 2.0.39.  It use to say .38.  It may have come along with the latest Planner update.

• ▶ Reply

Permalink Reply by Nigel Conliffe on August 14, 2011 at 9:43pm

Sadly I am running on a Mac.

Next project (after figuring out Xbee support) seems to be resurrecting my Windows box which died in the move.

 

Thanks

 

• ▶ Reply

Permalink Reply by John Hanson on August 15, 2011 at 2:19pm

.39 now downloading in latest MP - so far arming and sonar alt hold probs seem much better.

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on August 15, 2011 at 10:29pm

Nigel, the planner will run on mac.. not as stable as it should be, but will run. you need "mono" to use it.

• ▶ Reply

Permalink Reply by Andrew Adams on August 17, 2011 at 6:19pm

Please tell me more. How do I do this? I hate having to run vmware...thanks!

• ▶ Reply

Permalink Reply by brakar on August 15, 2011 at 3:33pm

Hi, is it .38 which is the current "stable version". (Just back from holliday and not very up to date).

 

brakar

• ▶ Reply

Permalink Reply by Vincent Mees on August 16, 2011 at 2:28am

Just tested v39 available from the trunk.

Flight seems quite stable (little windy at the moment).

Sonar does not work. Getting 137 as value.

Also leveling the quad with MP isen't possible. MP askes for the version 37.

Keep up the good work.

Thanks

• ▶ Reply

Permalink Reply by Vincent Mees on August 16, 2011 at 3:43am

Also loaded v39 through MP and same problem.

Sonar works fine with test in terminal and CLI.

 

• ▶ Reply

Permalink Reply by druckgott on August 16, 2011 at 8:28am

Is it posible to get the v39 on the download section?

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• …
• 9
• Next ›
• Page