3DR RadioTelemetry Kit-915 Mhz driver
The 3DR RadioTelemetry Kit-915 Mhz works fine on my Windows 7 laptop.
But out in the field I like to use an older Windows XP laptop.
I installed the Mission Planer APM, seems to work fine.
The only problem, the plug and play for the 3DR RadioTelemetry Kit-915 Mhz doesn’t work.
So I need to download a driver.
Please has someone an idea where I could find and download the right driver ???
Thanks a lot.
Replies to This Discussion
-
Permalink Reply by Vernon Barry on -
Standard FTDI driver. Remember it's just a USB to serial link, thus the FTDI chip is before the radio modem. Once you understand what hardware is what (you'll keep seing the same components over and over with Arduinos) it all becomes pretty simple. For the most part, every Arduino only has serial ports (there are some like the 32u2 with USB), thus they nearly always either have a FTDI chip, or a 32u2. The drivers folder of any version of the Arduino IDE would have it, or here it is:
Driver
http://www.ftdichip.com/Drivers/CDM/CDM20824_Setup.exe
How to install
http://wiki.ultimaker.com/FTDI_Driver_installation
-
Permalink Reply by Manfred Dickgiesser on -
Thanks a lot for your help
everything works now perfect :-)
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
German Ardu-Group
106 members
-
ArduCopter User Group
1279 members
-
ArduPlane User Group
671 members
-
ArduRover User Group
183 members
-
Andropilot Users Group
182 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
