95% done quad - Ardupilot Mega, IMU oilpan, GPS, sonar, motors, ESCs, and bonus frame

I have messed with this quad quiet a bit, but a new baby and other projects have caused me to  not have enough time to dedicate to this any more.

 

I have the following for sale (I would consider breaking it up):

 

  • Fully assembled and working ArduPilot Mega with IMU shield (Rev-H) ($250 new)
  • Mediatek MT3329 GPS
  • Maxbotix LV-EZ0 ($29 new)
  • Home-made power distribution board
  • 2x 2200ma LiPo batteries ($22 new)
  • 4x HobbyKing 30A ESCs ($45 new)
  • 4x Turnigy 2217s ($56 new)
  • Frame and misc props if you want them (one is broken)

Overall, there is about $450 of stuff here.  I'd let it all go for $350.

This has flown, but I'm not a very good pilot.  I had it in the X config, but have read the + might be more stable.  I think the frame may be a bit on the heavy side, but it works and it's yours if you want it.

 

I'd be glad to email a video of the APM showing sensor output in a serial window.

Tags: apm, assembled, esc, imu, motors

Views: 650

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Drew Pierce on August 1, 2011 at 9:21pm

Also, I have a Spektrum DX-7 available I currently have listed on eBay if you'd like a radio and receiver as well.  It has an AR7000 receiver.  It was $299 new, and they go for around $220-250 on eBay.  If you'd like the full package I'd be willing to make a deal as well.

Permalink Reply by Naji Karim on August 2, 2011 at 7:55pm

How much for:

  • Fully assembled and working ArduPilot Mega with IMU shield (Rev-H) ($250 new)
  • Mediatek MT3329 GPS
  • Maxbotix LV-EZ0 ($29 new)

 

Is this the 1280 or 2560 version?

Permalink Reply by Drew Pierce on August 8, 2011 at 6:39am

It's the 2560 version.  I would consider breaking this up, and would sell those three items for $250 shipped.  You're getting the sonar and assembly for free.

Permalink Reply by tshado on August 4, 2011 at 4:35pm
Helllo Drew,
I am intersted to buy your parts
i sent you a friend request but you didn't answer...
regards
JC
Permalink Reply by eric vandervort on August 9, 2011 at 5:44pm

I'm interested in the whole package if it hasn't sold yet.

Permalink Reply by Drew Pierce on August 12, 2011 at 6:50am
Guys - all replies were going to my spam folder. I updated my settings so I should get them now. I generally reply to emails with an hour. I still have the items in the first post available.
Permalink Reply by eric vandervort on August 12, 2011 at 10:06am

I'm still interested in the whole package.

Permalink Reply by Paul Deardorff on August 13, 2011 at 7:29pm

I'm interested in the whole package too...any updates? still for sale? 

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
3 APM 2.5 from hobbyking

APM 2.5 from hobbyking
4 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
5 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
6 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
7 ArduPlane 2.73 released

ArduPlane 2.73 released
8 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
9 Thirty Days (#17): 12-rotor close up

Thirty Days (#17): 12-rotor close up
10 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service