This my 3rd crash with similar way, dipping.... out of no reason. I am currently flying Y6 AC2 2.0.48. with GPS and Magneto.

My previous 2 crashes was with earlier code. My 2nd crashes happened even after i solder the connection between esc and motor. After the second crash I change most of the esc signal connectors. After that it seems ok till the 4th flight. That is when I crash the third time. I even mount the quad for test previously but nothing happens.

BTW I hv been using Arducopter for a year.

Attached is my flight logs. Hope someone can help me to identify the problem. If possible provide some guide on what to look for so that i can troubleshoot myself in future.

Log: LimAC2_log.zip


Thanks a million

 

Lim
 

Views: 942

Reply to This

Replies to This Discussion

i wonder will it be better to just use the + - terminal on APM. I use that when I first started. Wonder why they don't recommend that.

 

I actually is having problem getting to engage the GPS lock (red led) with power from BEC. I use USB to power up and the GPS lock possible.

Seems problem is endless. Not blaming anyone.

Update: no GPS lock due to redundant power from ESC. Now back to single power source from separate BEC, with all ESC -ve terminal shorted and connect to APM -ve at output channel.

Going for test, wish me luck.

 

Update: As per today, no crash. I am glad. The only change i made was to short all negative terminal from ESC and connect it to the APM output channel negative terminal.

Glad to hear it worked for you too, it is a strange ting, since it can be measured that the Ground is hard-wired inside escs.

RSS

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service