ACM v2.0.49 w/ MP v1.0.89 CLI not reading properly
Hello all,
I am running the latest MP and ACM code but for some reason the Mission Planner cannot read the data properly from the ACM board. All I get on the screen is a bunch of random characters like ???D/?c/?. I triple checked that the slider is in the CLI position (back towards the servo in/out pins). Any advice?
Thanks,
Adam
Tags: CLI
Replies to This Discussion
-
DeveloperPermalink Reply by Adam Rivera on -
Also, MP will not connect via Mavlink either. Nothing has changed in my configuration except the firmware.
-
DeveloperPermalink Reply by Adam Rivera on -
Also, the Power, MUX and PPM led lights on the main board are solid. The A light on the shield just blinks and the power led on the shield is solid.
-
3D RoboticsPermalink Reply by Chris Anderson on -
I can't replicate any problem. Are you sure your baud rate is 115k?
-
DeveloperPermalink Reply by Adam Rivera on -
Man. Another gotcha for me... I nearly had a heart attack over here :-) Forgot to set my baud back to 115 after using telemetry. Need to sleep more at night. Thanks Chris.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1277 members
-
Moderators
24 members
-
ArduRover User Group
183 members
-
Telemetry over cellular …
246 members
-
ArduCopter (traditional …
179 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
