Replies to This Discussion

Permalink Reply by Rick Eis on August 29, 2012 at 7:24pm

I'm having the same problem ~ 1 click and it goes up and one click down and it will go down ~

• ▶ Reply

Permalink Reply by DanRZ on August 30, 2012 at 12:40am

Hello, multiple causes can be possible, i think  :

1 - Wrong calibration of throttle course on the ESCs. Solution : Recalibrate all ESCs.

2 - Too "strong" prop. Solution : Change prop and reduce diameter and/or pitch.

3 - Too "high" motor. Solution : Use a motor with less Kv or use a "lower" battery voltage.

Another solution is to use a throttle curve on the transmitter to "smooth" throttle

like using expo on other commands ...

;)

• ▶ Reply

Permalink Reply by u4eake on August 30, 2012 at 12:44am

Get rid of the clicks on  your throttle stick !  That's for planes, not for helis or multicopters, these need a smooth throttle stick so you can get it to hoover.

• ▶ Reply