Replies to This Discussion

Permalink Reply by Helldesk on February 21, 2012 at 9:06am

It looks like you need to press Enter three times (x3) in the terminal to activate CLI mode.

The current planner supports the APM 2 and the software seems to run on it. I am not sure if it fully leverages the hardware capabilities of the APM 2 board yet, but at the moment you get at least an APM 1 level capability out of it.

Downloading logs: go to terminal and press your Enter key three times to access CLI mode and download logs just like before.

• ▶ Reply

Permalink Reply by Simon on February 21, 2012 at 10:31am

Thanks for the hint, i'll try that.

Cheers,

-S

• ▶ Reply

Permalink Reply by Sid Lookingbill on February 22, 2012 at 11:28am

Has all the APM 2.0 been sent out  from the first 1000, I was told that my order was in that first 1000, but my order is still processing 

• ▶ Reply

Permalink Reply by Don Brooks on February 22, 2012 at 1:18pm

3DRobotics Last APM2 order shipped #18286 about 1 hour ago · reply · retweet ·

• ▶ Reply

Permalink Reply by Richard on February 23, 2012 at 6:44am

I have been trying to pre-order the Ardupilot Mega V2 for a while, but it seems unable to accept the pre-order, is there anyway i can do this to ensure I recieve one form the next batch?

Cheers

• ▶ Reply

3D RoboticsPermalink Reply by Chris Anderson on February 23, 2012 at 7:54am

Preorders will open again in about a week. 

• ▶ Reply

Permalink Reply by Richard on February 23, 2012 at 8:39am

Cheers Chris - i'll check back then.. Maybe a silly question and slightly off topic, but is there a way I can start using Xplane with the Mission Planner without the Ardupilot to start learning the code etc....?

• ▶ Reply

Permalink Reply by Sid Lookingbill on February 27, 2012 at 9:04am

any updates on last APM 2.0 shipped

• ▶ Reply

Permalink Reply by Don Brooks on February 27, 2012 at 9:47am

You can see it in the lower left on http://store.diydrones.com/ in the twitter feed and other info in the product listing on the store...

Permalink Reply by Sid Lookingbill on February 27, 2012 at 10:26am

Yeah I know where the update is being updated..................just has not been updated for 4 days

Permalink Reply by Don Brooks on February 27, 2012 at 12:27pm

"As soon as we have a solid confirmation for a new baro sensor order delivery date, we will open pre-orders again.  The projected date for at this moment is around the end of February,  beginning of March."

Clearly they have no more... so aren't shipping any... so there's no updates.

Permalink Reply by Sid Lookingbill on February 27, 2012 at 12:35pm

I am not waiting to pre order..........I am in the first batch and mine has not shipped.

From sales last Tuesday,,,they sent me this e mail>>

shipped until APM# 906. Your Order# 18527 is currently APM# 979. For any further updates, you may log in to the forum of the APM 2.0 or Twitter.  

So i am just looking for some update as to when mine ships..........OK

• ‹ Previous
• 1
• 2
• Next ›
• Page