APM 2 Status?

Yay I got my APM 2 delivered yesterday. Thanks to all of you who have been working hard to deliver this beautiful product.

What is unclear to me at the moment is:

 - how to set APM 2 into CLI mode (switch is gone?)

 - how far is the firmware compatible with APM 2?

 - Is the mission planner working with APM 2 properly (downloading logs seems to be impossible without cli mode) ?

Cheers,

-S

Views: 1041

▶ Reply to This

Replies to This Discussion

Permalink Reply by Don Brooks on February 27, 2012 at 1:03pm

Yes.. reading that it seems they numbered all of the APM2 orders, and were able to produce and ship 906 of them. Your order is 979. Looks to me like you didn't make the first batch :(

Permalink Reply by ZacCom on February 27, 2012 at 1:41pm
I sen email last week an havnt got a response me order number was 18524 and if your 18527 I should be getting mine soon to. However, nothing from sales at this time myself.
Permalink Reply by Sid Lookingbill on February 27, 2012 at 1:14pm

No they  are producing 1000....so that puts me in the first batch,,,,,That states that they have shipped 906 and mine is 73 from being produced and shipped.

Permalink Reply by Dan "HotSeat" Neault on February 27, 2012 at 1:16pm

Hell, I'm 18580, I may just make it in :)

Permalink Reply by ZacCom on February 27, 2012 at 10:36pm
I sent them a email still no answer.

3D RoboticsPermalink Reply by Chris Anderson on February 27, 2012 at 10:39pm

Please follow the Twitter feed for status updates. 

Permalink Reply by Eagle on February 28, 2012 at 8:14pm

I just received my APM2 and tests (on the bench) so far are A ok.

Be patient guys, you will not be disapointed.

It is a piece of Art!

Now if winter can go away so I can do some tests up in the air!

... ooups... am I being impatient now?  ;) 

Permalink Reply by Eagle on February 28, 2012 at 8:20pm

... just make sure you follow drivers config.

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 ArduPlane 2.73 released

ArduPlane 2.73 released
3 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
4 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
5 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
6 APM 2.5 from hobbyking

APM 2.5 from hobbyking
7 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
8 DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)

DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
9 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
10 HD video for UAV's

HD video for UAV's

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service