I am trying to get the input readings on the redboard. 0-7 numbering on the channels.
I loaded the latest PPM firmware.
I will be only using channels 1,3 and 8 (0,2,8 on my board)
When I connect my Hitec OPTIC6 airplane tx/rx to the board. I get good reading however, when I connect my Futaba 3PJ to the board however, I get very erratic readings. sometimes one channel works, sometimes the other
Please let me know if you have any ideas on how to fix this issue.
I did some more investigation. the PWM pulses are staggered on both devices.
Also the the 3 futaba rx that is not working has its pulses 14ms apart. the Hitec one has pwm pulses that are 22ms apart.