Replies to This Discussion

3D RoboticsPermalink Reply by Chris Anderson on August 5, 2012 at 3:23pm

What version code are you running?

It's a smallish frame. Do you know what KV motors you've got and the prop size?

• ▶ Reply

DeveloperPermalink Reply by jasonshort on August 5, 2012 at 4:43pm

What gains are you running now? what kv motors? what size props? have you flown the naza controller on this quad? need more details.

• ▶ Reply

Permalink Reply by jos on August 6, 2012 at 12:29am

i'm running the latest version 2.7.1, i have the stock frame, with stock motors (920Kv), with 10" props ..

• ▶ Reply

3D RoboticsPermalink Reply by Chris Anderson on August 6, 2012 at 7:42am

Okay, those are relatively high kv motors and relatively small props, so my guess would be to turn down the stabilize P values by about 20% from the default. Jason, do you agree?

• ▶ Reply

Permalink Reply by TUFAN OZBEK on August 14, 2012 at 2:46pm

jos did you solve your problem?

i am planning to buy dji 550 frame and i have apm2 board

can you stabilize good?

thank you..

• ▶ Reply

Permalink Reply by jos on August 14, 2012 at 2:48pm

Its a nice and solid frame, now it's flying very good.

• ▶ Reply

Permalink Reply by TUFAN OZBEK on August 15, 2012 at 1:01am

can you give me a screenshot about your pid settings

or *.param file

thank you very much..

• ▶ Reply

Permalink Reply by Kirk D on November 27, 2012 at 8:46am

I too have integrated the APM 2.5 to the DJI Flamewheel 550 airframe and found that it does not hold position as well as the WKM. Does anyone have the PIDs for this frame?

 

Thanks

• ▶ Reply