Arducopter for sale RTF

I am selling my Arducopter with everything, carbon fiber frame, Turnigy 9x TX/RX, APM plus oilpan and GPS, 2 Lipos 5000mah and 4000mah, 5 motors (1 spare), extra props, extra hobbyking v1 wooden frame.  I have crashed it a few times, but the carbon fiber frame is still strong and sturdy.  It's on eBay if anyone is interested.

[IMG]http://i39.photobucket.com/albums/e196/huskerwr38/IMG_7994.jpg[/IMG]

http://www.ebay.com/itm/260956528411?ssPageName=STRK:MESELX:IT&...

Views: 792

▶ Reply to This

Replies to This Discussion

Permalink Reply by Al W on February 16, 2012 at 9:33am

Can you define "crash"? Landed on side? Tipped over? Crashed into ground/tree? I am seriously considering bidding for it. Thanks!

Permalink Reply by Brandon on February 16, 2012 at 11:22am

I have done all of the above! :)  My most serious crashes have cracked the dome on top, which is why it isn't pictured, and I broke one of the landing gear legs.  The frame is still very strong, arms and motor mounts are in great shape. 

Permalink Reply by Al W on February 16, 2012 at 12:25pm

Appreciate the honesty. The landing gear legs don't appear to be broken. Did you fix it? Could you post more pics?

Permalink Reply by Al W on February 16, 2012 at 12:28pm

Have you mounted any payloads on it (GoPro etc) and do you know what is its carrying capacity (in grams or lbs.) ?

Thanks!

Permalink Reply by Brandon on February 16, 2012 at 1:03pm

I did fix the landing gear...Gorilla Glue is great!  However, the dome was completely smashed.  Yes, I have mounted a GoPro on it and it carried it no problem. I'm not sure what it's carrying capacity is, I suppose I could test it out tonight and let you know.

Permalink Reply by Al W on February 16, 2012 at 1:17pm

Nice! Where did you mount the GoPro on the top or beneath the drone?

Permalink Reply by Brandon on February 16, 2012 at 1:19pm

Below it with some velcro straps.

Permalink Reply by Al W on February 16, 2012 at 8:32pm

Did you build the drone yourself or buy it from a kit? I am just concerned about the compatibility of replacement parts. Thanks!

Permalink Reply by Brandon on February 17, 2012 at 11:11am

I built it myself.  I found the frame from fpvfoxtech.com, motors and TX/RX from hobbyking, esc and batteries are from hobbypartz.com.  I constructed the power distribution wire myself with 12awg wire.  

Permalink Reply by HangerRat on March 23, 2012 at 3:01pm

Is this still for sale, and what are you asking?

What version of the APM is that?

Thanks

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 APM 2.5 from hobbyking

APM 2.5 from hobbyking
3 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
4 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
5 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
6 ArduPlane 2.73 released

ArduPlane 2.73 released
7 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
8 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
9 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
10 Thirty Days (#17): 12-rotor close up

Thirty Days (#17): 12-rotor close up

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service