Replies to This Discussion

ModeratorPermalink Reply by Brian on October 11, 2012 at 7:13pm

Say it isn't so... You are not leaving us AP(L)a are you? By the way I am oober cheap, so I will not offend you with my reasonable$$`

• ▶ Reply

ModeratorPermalink Reply by Graham Dyer on October 11, 2012 at 10:12pm

Reluctantly so, need some cash for a new GPS :)

• ▶ Reply

Permalink Reply by Ahmad Usman on October 14, 2012 at 2:12pm

What will be your final price?

• ▶ Reply

ModeratorPermalink Reply by Graham Dyer on October 14, 2012 at 11:55pm

Make an offer. I need a new Ublox GPS so there's a guide...

• ▶ Reply

Permalink Reply by Charles lakins on October 21, 2012 at 8:45pm

can you tell me a few things?

 

did you use airspeed sensor and gps (em406) and get it to lock on ,with it wired that way?

and what would you want for these?

i dont really need the sensors just the spare boards to have on hand

 

• ▶ Reply

ModeratorPermalink Reply by Graham Dyer on October 22, 2012 at 2:30am

I used the mediatek and the em406 gps, the gps only shares the port with the ftdi comms so if one doesn't have the shield you have to unplug the's gps to upload the software.

The v2 IMU cost me $99 when I bought it so somewhere around there for everything

• ▶ Reply

Permalink Reply by eblackburn on November 4, 2012 at 7:55pm

$99 for everything in the picture?

• ▶ Reply

ModeratorPermalink Reply by Graham Dyer on November 11, 2012 at 11:23am

yes plus postage at cost

• ▶ Reply