Hi,
This is my first post on a forum so I'm sorry, in advance, if I make a mistake.
I'm flying a 3DR quadcopter frame with a apm 2.5. When I first got it, it was used and I powered the board from the usb and the power rail and blew the 3.3v regulator. So I put an arduino board on my quad and used that as the regulator and it worked without a problem for about 10 flights and then it started to randomly freeze and I almost lost it a couple of times. In an attempt to diagnose the problem I built a tricopter frame and loaded the tricopter firmware, to see if it was the firmware, and it still froze so I am kind of out of ideas. Any help would be much appreciated. Thanks
Noah
Replies