Hi
While waiting for an assembled A/P Mega to arrive, I downloaded and extracted the APM software - opened it and searched on but could not find the directed ArdupilotMegaPlanner.exe file. I did find a file named ArdupilotMegaPlanner.exe.config but this extension is not recognized by Windows 7.
One file I did open briefly showed a green APM title screen - then a DOS screen opened on top and hung up permanently on Waiting for serial port to open message.
0 What is the exact file name I need to look for? memory size would be a helpful checkpoint.
o or do I need to wait until the hardware and cable are in place for the hangup to go away.?
Any help off "stuck" is appreciated. NOTE. I worked through the Audupilot/IMU experience OK - what am I missing here?
Thanks
Mike
Tags:
its the one with the litte green icon
Permalink Reply by Mike Cowan on December 11, 2011 at 12:36pm Thanks Michael - that tip was helpful
Mike Cowan
Permalink Reply by Mike Cowan on December 11, 2011 at 12:46pm Thanks Chris. I connected my ArduPilot and FTDI to the USB in lieu of an A/P mega not yet here - 2min download - clicked on your icon and instant up and connect to COM 3 at 11k baud. Very slick and professional GUI. The A/C setup page was somehow bypassed but hey, I like a challenge. 20 years after retirement from DFCS and I couldn't resist the tiny cheap hardware. Back in the saddle again! What fun. Thanks so much.
Mike Cowan
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.1283 members
24 members
180 members
4 members
5 members
© 2013 Created by Chris Anderson.
Powered by
