Developer

ArduPlane 2.40 released

ArduPlane 2.40 has now been released. Many thanks to everyone who gave flight test feedback on the beta release!

Note that ArduPlane now uses MAVLink 1.0, so you'll need to update your Mission Planner to the newer version, which supports that. You'll find it in the same directory as your current Mission Planner, in a file called ArduPilotMegaPlanner10.exe

For a list of feature changes, see the ArduPlane-2.40-beta announcement. Since the beta the following things have changed:

  • auto-configuration of UBlox GPSes. It should now be possible to attach a UBlox GPS in just about any state and the APM GPS code will re-configure it appropriately. The configuration isn't saved, so if you power cycle the GPS it will revert to what was set before, but it should now be possible for the APM to use a UBlox in factory default config. It's still a good idea to setup your UBlox correctly (38400 baud in UBX binary mode) as that will make the detection faster on startup, but it should work regardless.
  • updated Camera and Mount control code from Amilcar Lucus and Greg Fletcher. These are not enabled by default, and I have not tested them myself, so I'm hoping Amilcar and Greg will be able to answer any questions that come up. Many thanks to Amilcar and Greg for all their work on this!

Happy flying!

Views: 2813

▶ Reply to This

Replies to This Discussion

Permalink Reply by Michael Pursifull on July 16, 2012 at 8:26pm

Yes. See http://www.youtube.com/watch?v=2FSGZ6ic7zY and http://www.youtube.com/watch?v=p-MOeTt_Oq8 

I believe that is discussed and the reason for this is explained.

Permalink Reply by Michael Pursifull on July 16, 2012 at 8:27pm

Some of the logic was changed since these videos were made, but it still covers this... I think it is at the beginning of part 2, but please watch them in order to get the proper context

Permalink Reply by Eagle on July 17, 2012 at 8:49pm

thanks Mike

Permalink Reply by Gábor Zoltán on July 20, 2012 at 6:03am

How can i get RSSI information trough a port on MAVLink.

How would you do it? :)

Permalink Reply by Gábor Zoltán on July 23, 2012 at 3:58am

Elevator is reversed in FBW_B!


How can i change this?

Permalink Reply by Mike Mac on July 25, 2012 at 7:47am

Any Idea when V2.5 will be out? I heard that it’s getting close.


DeveloperPermalink Reply by Andrew Tridgell on July 25, 2012 at 7:40pm

its out now :-)

RSS

Social Networking

Top Content 

1 APM 2.5 from hobbyking

APM 2.5 from hobbyking
2 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
3 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
6 B go Beyond Quadcopter/Car convertable

B go Beyond Quadcopter/Car convertable
7 Hobby King Ardupilot

Hobby King Ardupilot
8 ArduPlane 2.73 released

ArduPlane 2.73 released
9 Thirty Days (#17): 12-rotor close up

Thirty Days (#17): 12-rotor close up
10 Mapping Mission Ride Along

Mapping Mission Ride Along

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service