Aurdupilot and GCS

Hi,

I have ardupilot and an IMU connected (according to this post: http://www.diydrones.com/forum/topics/ardupilot-imu-v2-flat-venus

and I have a question regarding the GCS software. When I connect the FTDI cable to the ardupilot and load the software, I can see the data streaming through the Debug Data tab, but nothing else is working on the dials or the map.

Can someone let me know if I have things correctly setup?
My Previous post : http://www.diydrones.com/forum/topics/ardupilot-imu-v2-flat-venus

Thanks
Tonino

Tags: aurupilot, gcs, gps, venus

0 members like this

▶ Reply to This

Replies to This Discussion

3D RoboticsPermalink Reply by Chris Anderson on August 13, 2010 at 10:42am

Have you selected the right GCS in the config file?

#define GCS_PROTOCOL 0

▶ Reply

Permalink Reply by Tonino on August 13, 2010 at 12:08pm

Hi,

Yeah - it is set to 0 already.

Thanks
Tonino

▶ Reply

Permalink Reply by Earl on August 13, 2010 at 12:24pm

is baud rate set to 38400
Earl

▶ Reply

Permalink Reply by Tonino on August 13, 2010 at 1:09pm

yes it is. In the debug tab I can see the ardupilot data being streamed and changes when I move the control sticks. I can also see the GPS data as well coming though there, but none of this is being registered...

Thanks for the help ;)

Tonino

▶ Reply

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Social Networking

Top Content

1	Mapping Mission Ride Along
2	ArduPlane 2.73 released
3	Alt_hold and loiter acting crazy
4	ArduVTOL - Wingcopter - Flight Report Nr.1
5	APM 2.5 from hobbyking
6	Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7	3 axis Camera Gimble connections.
8	DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
9	Looking for best laptop screen to see in the sun
10	New micro-cameras emulate insects' compound eyes

RSS
View All

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here.