Aurdupilot and GCS

Hi,

I have ardupilot and an IMU connected (according to this post: http://www.diydrones.com/forum/topics/ardupilot-imu-v2-flat-venus

and I have a question regarding the GCS software.  When I connect the FTDI cable to the ardupilot and load the software, I can see the data streaming through the Debug Data tab, but nothing else is working on the dials or the map.

Can someone let me know if I have things correctly setup?
My Previous post : http://www.diydrones.com/forum/topics/ardupilot-imu-v2-flat-venus

Thanks
Tonino

Tags: aurupilot, gcs, gps, venus

Views: 60

▶ Reply to This

Replies to This Discussion


3D RoboticsPermalink Reply by Chris Anderson on August 13, 2010 at 10:42am
Have you selected the right GCS in the config file?

#define GCS_PROTOCOL 0
Permalink Reply by Tonino on August 13, 2010 at 12:08pm
Hi,

Yeah - it is set to 0 already.

Thanks
Tonino
Permalink Reply by Earl on August 13, 2010 at 12:24pm
is baud rate set to 38400
Earl
Permalink Reply by Tonino on August 13, 2010 at 1:09pm
yes it is. In the debug tab I can see the ardupilot data being streamed and changes when I move the control sticks. I can also see the GPS data as well coming though there, but none of this is being registered...

Thanks for the help ;)

Tonino

RSS

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 ArduVTOL

ArduVTOL
3 How to analyze a crash?

How to analyze a crash?
4 HD video for UAV's

HD video for UAV's
5 Mapping Mission Ride Along

Mapping Mission Ride Along
6 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
7 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
8 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
9 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
10 NEVER connect a Capacitor backup or voltage protector on APM board

NEVER connect a Capacitor backup or voltage protector on APM board

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service