Can I use a 2.4 cam system?

I am using an easystar for a development testbed while design continues on our own airframe. Currently flying with a Fatuba 2.4ghz radio, is the fatuba going to be useless with a 2.4 video system?

THanks

Russ

0 members like this

▶ Reply to This

Replies to This Discussion

AdminPermalink Reply by Thomas J Coyle III on August 16, 2009 at 9:44am

brotherat,

If you use one of the 2.4 GHz 500 mw video transmitters, you may have a problem maintaining reliable 2.4 GHz R/C control.

I have seen a solution where the video transmitter was mounted vertically in the tailset with the antenna paralled to the rudder. That mounting position kept the video transmitter as far from the R/C receiver as possible.

Regards,
TCIII

▶ Reply

RSS

Welcome to
DIY Drones

Sign Up
or Sign In

Or sign in with:

Social Networking

Top Content

1	ArduCopter-3.0 ready for wider use
2	APM Project vs DJI NAZA and WOOKONG
3	APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
4	Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5	APM Copter 2.9.1.b has been released
6	10k autonomous flight - telemetry guided flight, and other APM tests!
7	MAAT final version is being tested
8	Getting ready for Arducopter 3.0
9	Help Tuning Arduplane 2.73 With A Large Slow Airframe
10	How to succeed without really trying

RSS
View All

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here.