Hi Everyone.  I finally have my homemade hexcopter built and I'm trying to load the firmware on my APM2

I've loaded the device drivers and when I plug the APM2 into my USB port, I get Arduino Mega 2560 (COM4) showing up under device drivers.  My A LED blue is solid (after awhile).  My C LED (red) flashes.  The B LED does nothing.  The mid blue LED (GPS if I remember correctly) is solid.  And there is a green power LED (solid) opposite the USB connector.

However, firmware fails to load.

Any help would be greatly appreciated.  This board doesn't seem to be functional.

INFO Program - ******************* Logging Configured *******************
INFO ArdupilotMega.Speech - TTS: init, mono = False
INFO ArdupilotMega.MainV2 - myview width 1008 height 559
INFO ArdupilotMega.MainV2 - this   width 1024 height 673
INFO hud.HUD - Index: 2, Color: 32 (8888), Depth: 24, Stencil: 8, Samples: 0, Ac
cum: 0 (0000), Buffers: 2, Stereo: False
INFO hud.HUD - Vendor: ATI Technologies Inc.
INFO hud.HUD - Version: 4.2.11399 Compatibility Profile Context
INFO hud.HUD - Device: AMD Radeon HD 6800 Series
INFO ArdupilotMega.MainV2 - Listening for client - 1 client at a time
INFO ArdupilotMega.GCSViews.Firmware - FW load
INFO ArdupilotMega.GCSViews.Firmware - No Home ArduCopter V2.5 Heli Hil http://m
eee146-planner.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-HELHIL
-1280.hex
INFO ArdupilotMega.GCSViews.Firmware - FW load done
WARN ArdupilotMega.ArduinoDetect - Not a 1280
WARN ArdupilotMega.ArduinoDetect - Not a 2560
WARN ArdupilotMega.ArduinoDetect - Not a 1280
WARN ArdupilotMega.ArduinoDetect - Not a 2560