hey guys i just baught a hexa on http://www.electronicarc.com/catalogo/product_info.php?cPath=85_88&products_id=608&osCsid=cb0f0bee4e95cc6e21e26ec777a611c7
this website there is a video too how it works. First of all i didnt get any manual how to build it. Anyway i built the frame have the motors and esc's up got a turnigy 9ch (8ch) transmitter and receiver 3 3s 5000mah turnigy lipo battery. i chacked all the motors through the receiver, they are work fine nice and quiet. though i got some problem with ch5 on the receiver, the motor wont set up and its keep beeping.
But My major problem is i cant power up the apm. i looked after stuff on the net and i found out i need a power distribution board what i didnt get with the package. is it possible to run it without it?
the other thing i found a few diagram what shows how to connect it. 1 esc has to go in the receiver and that gives power to the apm. (?)
i tried a few things but non of them work. When i plug the usb into the apm lights coming on.
PLEASE somebody help me how to wire all the esc's between receiver and apm and how to power it up.
thanks
Replies
here is some photo off the hexa
P1000268.JPG
P1000274.JPG
P1000266.JPG