Connecting a Magnetometer to ArduIMU V2

I would like to know how to connect a magnetometer to ArduIMU V2

Views: 109

▶ Reply to This

Replies to This Discussion

Permalink Reply by Alexandre Girard on January 14, 2011 at 6:35am

You just need to plug it on the I2C pins on the ArduIMU:

 

http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 ArduPlane 2.73 released

ArduPlane 2.73 released
3 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
4 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
5 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
6 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
7 DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)

DroidPlanner for Android The best missionplanner alternative! Using Mavlink via cheap usb adapter (Follow me - PIDS - ACC calibration - FREE)
8 HD video for UAV's

HD video for UAV's
9 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
10 Thirty Days (#13): Y6 in-flight motor failure tests

Thirty Days (#13): Y6 in-flight motor failure tests

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service