Moderator

"Construction worker" required

Could anybody build us a scale model of the Sparkfun building in Sketchup?? One that anybody could drop onto their own bit of Google earth?

No I'm not going to tell you why.

But I might try and lean on Chris to generate a prize for the best one ;-)

It won't take any of you many seconds to guess why we might want a model!!!

Views: 43

▶ Reply to This

Replies to This Discussion


ModeratorPermalink Reply by Gary Mortimer on February 16, 2010 at 1:03am
Doug did you ever get any pictures Graham could use??

DeveloperPermalink Reply by Doug Weibel on February 16, 2010 at 7:31am
Uh, I forgot to take pictures last time, but I'm going by there in a couple hours and will take some pictures. What would you like me to do with them (upload, email, other)?

DeveloperPermalink Reply by Doug Weibel on February 22, 2010 at 8:13pm
Pictures of the building starting with the northeast corner proceeding around through northwest, southwest and southeast.








ModeratorPermalink Reply by Morli on February 27, 2010 at 4:48pm
"don't ask Chris :) , just do it " will be the answer IMHO

ModeratorPermalink Reply by Gary Mortimer on March 16, 2010 at 5:12am
Thanks to all that offered, its a pretty dull building!!

3D RoboticsPermalink Reply by Chris Anderson on March 16, 2010 at 7:15am
Actually Graham Dyer did a great one! I just couldn't find it when I was uploading my run. Here's it is:


ModeratorPermalink Reply by Gary Mortimer on March 16, 2010 at 7:39am
Wow, well will you look at that trees and all!!!!

Fantastic.

Thanks Graham.

3D RoboticsPermalink Reply by Chris Anderson on March 16, 2010 at 7:58am
I'm trying to uload the Sketchup file, but file attachments aren't working this morn...

ModeratorPermalink Reply by Graham Dyer on March 17, 2010 at 6:29am
Try this:
Attachments:

RSS

Social Networking

Top Content 

1 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
2 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
3 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
4 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
5 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 MAAT final version is being tested

MAAT final version is being tested
8 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
9 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe
10 How to succeed without really trying

How to succeed without really trying

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service