Default ArduCopter Configure Files

Hello,

I switch my battery today from 4S 3700 mAh to 3S 5000 mAh and my Hex flies poorly.  I was hoping the new battery would work better.  I thought my configuration file was the default with a little tuning.  I had lowered the Stabilize roll and pitch from 4.5 to 4.  I reset these values back to 4.5 after installing the new battery.  When I flew the flight was wobbly and just poor.  I kept the Hex close and low for fear of a crash.

My question is where can I find the default configure files for both for Hex and Quad?  I went through the wiki manuals and didn't find them, nor did I find them in the download area.  I also recent upgraded to 2.8.1.  Both my Quad and Hex are 3DR kits.

Thanks
Richard

Tags: Configure, Default, Parameter, Params

Views: 190

▶ Reply to This

Replies to This Discussion

Permalink Reply by Richard Boyhan on November 29, 2012 at 7:04pm

Gee, I get to answer another of my own posts.  LOL.  But not really...

I found when looking more closing at my parameters that I had set the Throttle Rate P at 30.3.  Ouch, no wonder it flew so poorly.  That's what happens when you rush things, I so wanted to see how my new battery would work, I flew on my lunch hour today. 

Rush, rush, crash, crash.

But, my original question still stands, where can I find the default parameter files for both the Hex and Quads sold by 3DR?

Thanks,
Richard

Permalink Reply by Steven Tisseyre on November 30, 2012 at 12:27pm

Don't know if this is of any help to you Richard, but I always take a screen shot of the default values for a new APM.

 

This is what I have for 2.8.1.

 

Hope this is what you are after.

Permalink Reply by Richard Boyhan on November 30, 2012 at 4:43pm

Thank you. Is this for Hex or Quad?

RSS

Social Networking

Top Content 

1 Mapping Mission Ride Along

Mapping Mission Ride Along
2 Alt_hold and loiter acting crazy

Alt_hold and loiter acting crazy
3 ArduPlane 2.73 released

ArduPlane 2.73 released
4 APM 2.5 from hobbyking

APM 2.5 from hobbyking
5 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1
6 Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)

Mechanical Hands From A MakerBot: The Magic Of Robohand (From Makerbot blog news)
7 3 axis Camera Gimble connections.

3 axis Camera Gimble connections.
8 Looking for best laptop screen to see in the sun

Looking for best laptop screen to see in the sun
9 New micro-cameras emulate insects' compound eyes

New micro-cameras emulate insects' compound eyes
10 Thirty Days (#13): Y6 in-flight motor failure tests

Thirty Days (#13): Y6 in-flight motor failure tests

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service