Drones Parts from China

Hi, I am from Hong Kong. I am building drones for myself and plan to sell online. I trade many low price drone parts from China. For example Control Board with GPS, Copters Frame, Motors and ECS, Telemetry Modem at very competitive price. Anyone can post me if you are interested.

Regards

Tags: Drone, Parts, Sell, for

Views: 3492

Attachments:

▶ Reply to This

Replies to This Discussion


3D RoboticsPermalink Reply by Chris Anderson on June 27, 2012 at 9:23am

Ralph, I've PM'd you with a note about the legal use of 3D Robotics copyrighted and trademarked material. The designs are open source; the names (such as "ArduPilot" and "APM") and logos are not. 


ModeratorPermalink Reply by Sgt Ric on June 27, 2012 at 9:31am
And guess where people will look for support.
Permalink Reply by Smaragdos Kleovoulou on July 1, 2012 at 10:48pm

Ralph

I want to inform me when you ready with your online store  please.

k.smaris@hotmail.com

Smaris

Permalink Reply by strafer on July 3, 2012 at 11:52am

Hi Ralph,

 interested in dt gyros,  fog 3 axis modules and servo accelerometers.to make my own imu. Also high speed (>500mph) air data sensor..

thanks

strafer

Permalink Reply by Chakradhar on January 25, 2013 at 9:23am
Very good point....Fog Gyro would provide excellent results rather tha cheap MEMS sensors..
Permalink Reply by Smaragdos Kleovoulou on July 6, 2012 at 11:53pm

What will be the price for cinestar8  with 3axes mount with WKM component. ?

Permalink Reply by Henry on July 15, 2012 at 8:50pm

Ralph, send a list , Im look for droncell , long range telemetry , flight control , sensors, thanks

Permalink Reply by Smaragdos Kleovoulou on July 15, 2012 at 9:57pm

Hi where is that list ?

May I have it please ?

Permalink Reply by Brett Smith on July 18, 2012 at 4:06pm

Hi!

I am just building my first drone. This telemetry kit can both send and recieve data?

Looks like normal Xbee modules are $100. How much are you asking for??

Permalink Reply by Wyatt Ciomperlik on July 19, 2012 at 4:55pm

Hey Ralph, I sent you a friend request.   Get in touch, I need a few parts and I do professional web hosting and shopping carts.

Permalink Reply by Rafael Brunacci on December 10, 2012 at 8:34am

Hello Ralph,

I have interest to acquire a Drone Kit to use in the aerial photo application.

What king and how much it will cost?

Thank you

Rafael

Permalink Reply by Ravi on January 6, 2013 at 3:29am

hi ralph, for how much can u ship sky hunter FPV plane. this is a 2m, twinboom EPO aircraft made in china. also shipping upto india by ordinary air mail.

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 Drone shot down by police

Drone shot down by police
8 MAAT final version is being tested

MAAT final version is being tested
9 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
10 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service