Hello everyone,
I am working with the ardumega pilot, DX7 transmitter, and AR7010 reciever. I am having trouble understanding the wiring between the receiver and the ardu. right now i have throttle (channel 1 receiver) going to the ESC, and AUX 1 (channel 6 receiver) going into pin 3 (throttle on ardu).
One issue is that no signal comes from AUX 1 (checked with scope) on the receiver when anything on the DX7 is changed, so would that mean i have no control of collective pitch (assuming [throttle on ardu] means collective pitch)? The DX7 doesnt have any switch for the AUX 1, only AUX 2 and Gear.
So is collective pitch controlled completely by the Ardu board, with no input from me (seems wrong)
Hopefully someone out there can straighten me out, that would be appreciated!
Replies
Hi jeremy, sorry this discussion missed me i'll check the spektrum numbers tomorrow and come back to you.