dx7 switch issue
hi,
on a dx7, we have a 3 pos swwitch that allow to set a normal/alt /loiter mode switch.
on a dx7 we also have the gear switch, i ve set the pwn on this position for act as rtl, but nothing happend.
Are flight mode depending of one switch only ?
thxx for helping
best regards
hevre
Replies to This Discussion
-
Permalink Reply by Duy Pham on -
you must mix 2 switches for a channel ex: Aux2 and you can have 6 modes.
Cheers,
Duy
-
Permalink Reply by John Hanson on -
Check this out - on my dx7 I had best luck with 'Flap Norm' 52% (not 46%) and 'Flap Mid' = 16% (not 8%), rest all OK.
http://www.diydrones.com/profiles/blogs/setting-up-6-different-flig...
Now I get 6 modes no fail.
-
Permalink Reply by herve pellarin on -
wow thx u guys,
6 mods, i have to write it down on the remote otherwise it ll be trouble :)
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduRover User Group
183 members
-
ArduCopter User Group
1278 members
-
Andropilot Users Group
182 members
-
Moderators
24 members
-
Documentation Editors
51 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
