Hello all,
getting into this finally. I was wanting to order a electronics platform for my easy star, but it was sold out. Can I also order the one for bixler? If not I will adapt the plan on thingiverse: http://www.thingiverse.com/thing:11661 (now "just" a FPV platform).
Tags:
Permalink Reply by Brandon Smith on August 2, 2012 at 5:28am Is the platform for the bixler the one here: https://store.diydrones.com/Bixler_SkySurfer_Chassis_No_Pan_Tilt_p/...? If so, then it will fit, as long as you don't attach the bottom deck. The NiCd battery pack and electronics of the EasyStar gets in the way.
Also, I would fly with the Bixler. In my opinion, having the ailerons makes flying so much easier. I have flown with both the EasyStar and the Bixler, and have found that I was able to control the plane much better when there were ailerons.
Permalink Reply by Jasja Dekker on August 2, 2012 at 8:02am Hi Brandon,
thanks! That is indeed the one I meant. I realise that the bixler is a superior starter plane, but I was unable to find a seller in Europe, and getting it from hobbyking in the US meant another $40 shipment cost. So I went with the budget Easystar as a learning plane. Might add those ailerons, apparently you can cut those out in the plane.
Permalink Reply by Brandon Smith on August 2, 2012 at 12:34pm No problem.
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.205 members
719 members
88 members
54 members
1353 members
© 2013 Created by Chris Anderson.
Powered by
