EM406 connector for use between extender cable...
I am wondering if anyone can point me to the connector I will need to use between the EM406 gps module and the extension cable found here - http://www.sparkfun.com/commerce/product_info.php?products_id=9123
I would like to make it neat without having to splice wires:)
I would like to make it neat without having to splice wires:)
Replies to This Discussion
-
Permalink Reply by Jason Larocque on -
The extander cable connects directly on the EM406 GPS and on the ArduPilot board.
-
Permalink Reply by G. Timothy on -
Well, I guess they sent me the wrong cable then as they do not connect directly and the cable is not one foot as described..:)
-
Permalink Reply by Jason Larocque on
-
The EM401 and EM406 GPS mudules uses a 6 pins extension cable. The EM408 uses a 5 pins cable...
The connector on the ArduPilot board and the GPS module are 6 pins.
-
Permalink Reply by Dale on -
You probably solved it by now, but if for nothing more than my own future reference:
They look like JST SR connectors, http://www.jst-mfg.com/product/pdf/eng/eSR.pdf
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Japan ArduCopter Group
58 members
-
ArduCopter User Group
1355 members
-
Australia
88 members
-
Moderators
24 members
-
ArduRover User Group
207 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
