Replies to This Discussion

3D RoboticsPermalink Reply by Chris Anderson on December 7, 2010 at 10:37am

Never seen that one. Sounds like a messed up Arduino installation.

Can you post a screenshot of your Windows Device Manager with the FTDI cable shown as a COM port?

• ▶ Reply

Permalink Reply by Dan Morgan on December 22, 2010 at 2:52am

Hi Chris,

Here is a screen shot of my windows device manager showing the FTDI cable as a COM port. 

My configuration is Windows 7, Arduino 0027, Ardupilot 2.7.1.

 

Screen shot:

 

Screen shot of the Arduino error:

 

I have successfully loaded and flown Ardupilot 2.4 a few months ago and wish to upgrade to 2.7.

 

Have you got any other ideas as to what I can try as I have run through all the debug stuff I can find on this site.

 

Thanks for your help.

 

Dan

• ▶ Reply

Permalink Reply by Dan Morgan on December 13, 2010 at 4:25am

Hi,

Did you end up finding a solution to this error as I am getting it as well?

Cheers

 

Dan

• ▶ Reply

Permalink Reply by kwijatkowski on February 25, 2012 at 7:48am

I'm facing ssame problem rigth now. Seems like software issue on my desktop computer.Working well on laptop...

• ▶ Reply

Permalink Reply by Don Brooks on February 25, 2012 at 8:15am

if it's telling you a 30720 byte maximum, you have the wrong board selected in Arduino.

• ▶ Reply

Permalink Reply by Don Brooks on February 25, 2012 at 8:17am

Also note that this is an incredibly old thread that dates back to a very old ardupilot. It probably doesn't apply to your hardware...

• ▶ Reply