ESC Hz output adjustability
New here,
I was wanting to play around with using this hardware to control a variable pitch multirotor design. So instead of plugging into ESC's I would use servo's for thrust control. But the issue is that most all quadcopter controllers use a 400Hz 1520uS centering signal. The better quality servos for FBL/tail helicopters use an advertised input of 333Hz max at 1520uS and then switch to 760Us centering for higher Hz rates.
Can the Ardupilot be told to put out a slower Hz rate easily? Something like 270Hz at 1520uS?
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Model making for FlightG…
16 members
-
Andropilot Users Group
182 members
-
ArduCopter Italian Group
86 members
-
Documentation Editors
51 members
-
ArduPlane User Group
671 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
