Firmware Not Uploading March 31
Anyone know what's going on right now? I'm trying to upload any firmware from the Mission Planner and nothing is going through. Instead i get this error. i've tried this on Mission Planner 1.1.40 and 1.1.57 and 1.1.59.
Replies to This Discussion
-
3D RoboticsPermalink Reply by Chris Anderson on -
There aren't any issues with the Mission Planner or the repository (I just tried on a range of boards), so this must be an issue with your PC. Have you loaded firmware with this board and PC before? If not, it looks like you don't have a driver installed.
-
DeveloperPermalink Reply by Michael Oborne on -
the message is saying comport 8 doesnt exist. please make sure you pick a com port before clicking one of the firmwares.
-
Permalink Reply by Criterion-Industries on -
I know this is a slightly old thread, but I am also now having this issue. Despite selecting a com port I cannot get the board to connect. I have tried reinstalling MP to no avail. This is on a system that has been working fine. I loaded the hex 2.8.1 firmware as well as upgraded to MP 1.2.25 and now cannot connect at all.
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Moderators
24 members
-
ArduCopter Italian Group
87 members
-
Andropilot Users Group
183 members
-
Melbourne
47 members
-
ArduPlane User Group
692 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
