Hi DIY Drones,

my name is Gal and I'm a senior student at Tel Aviv university, Electric engineering.
My senior year project is to develop and design a quadcopter robotic unit.

This is the second prototype for the electrical system, what do u think? is the configuration alright?
how much weight will it be able to lift?

Motors: Turnigy Aerodrive SK3 - 2822-1090kv Brushless Outrunner Motor
http://www.hobbyking.com/hobbyking/store/__18151__Turnigy_Aerodrive...

ESCs: Turnigy Multistar 10 Amp Multi-rotor Brushless ESC 2-3S
http://www.hobbyking.com/hobbyking/store/__25362__Turnigy_Multistar...

Props: 8X4R Propellers (Standard and Counter Rotating) (6pc)
http://www.hobbyking.com/hobbyking/store/__11331__8X4R_Propellers_S...

FC: Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
http://www.hobbyking.com/hobbyking/store/__24723__Hobbyking_KK2_0_M...

Battery: Turnigy 3300mAh 3S 20C Lipo Pack
http://www.hobbyking.com/hobbyking/store/__9465__Turnigy_3300mAh_3S...

Battery Charger: Turnigy 2S 3S Balance Charger. Direct 110/240v Input
http://www.hobbyking.com/hobbyking/store/__8247__Turnigy_2S_3S_Bala...

Thx alot!

Views: 282

Reply to This

Replies to This Discussion

I think you are looking for this.
http://www.ecalc.ch/

RSS

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service