First Quad V2.0 - Is it ok?

Hi DIY Drones,

my name is Gal and I'm a senior student at Tel Aviv university, Electric engineering.
My senior year project is to develop and design a quadcopter robotic unit.

This is the second prototype for the electrical system, what do u think? is the configuration alright?
how much weight will it be able to lift?

Motors: Turnigy Aerodrive SK3 - 2822-1090kv Brushless Outrunner Motor
http://www.hobbyking.com/hobbyking/store/__18151__Turnigy_Aerodrive_SK3_2822_1090kv_Brushless_Outrunner_Motor.html

ESCs: Turnigy Multistar 10 Amp Multi-rotor Brushless ESC 2-3S
http://www.hobbyking.com/hobbyking/store/__25362__Turnigy_Multistar_10_Amp_Multi_rotor_Brushless_ESC_2_3S.html

Props: 8X4R Propellers (Standard and Counter Rotating) (6pc)
http://www.hobbyking.com/hobbyking/store/__11331__8X4R_Propellers_Standard_and_Counter_Rotating_6pc_.html

FC: Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
http://www.hobbyking.com/hobbyking/store/__24723__Hobbyking_KK2_0_Multi_rotor_LCD_Flight_Control_Board.html

Battery: Turnigy 3300mAh 3S 20C Lipo Pack
http://www.hobbyking.com/hobbyking/store/__9465__Turnigy_3300mAh_3S_20C_Lipo_Pack.html

Battery Charger: Turnigy 2S 3S Balance Charger. Direct 110/240v Input
http://www.hobbyking.com/hobbyking/store/__8247__Turnigy_2S_3S_Balance_Charger_Direct_110_240v_Input.html

Thx alot!

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

This reply was deleted.

Activity