FOR SALE - FRAME 3DR Vs B and DIYDrones motors 880 kv

To switching to the higher system, i sell a complete frame 3DR B version with:

-"Quadcopter Power Distribution Board already soldered and ready to be connected to ESC,motors, lipo and APM (i don't sell lipo and esc like in the photo)

-Velcro Battery Strap

and so on

This is the frame

I have replaced in the legs and PDB the https://store.diydrones.com/M3x18mm_Black_Nylon_Spacers_p/hw-ac3dr-... DIYDrones nylon spacers, sincerly of poor quality, with alluminium, is more robust and durable, and the screw are in metal with self-locking nut, better than the original nylon screws, light but that break and loosen after a short time. However i will give to you the original spacers, but not all the nylon screw.

-4 motors DYIDrones 880 kv with gold connectors 3,5 mm already soldered.

https://store.diydrones.com/Motor_AC2830_358_880Kv_p/ac-0004-05.htm

I will gift to you the 3DR sonar mount

https://store.diydrones.com/3DR_Sonar_Mount_p/ac3dr-son-mount.htm

All objects have 2 months of life

-I ask for 3DR frame kit 100 $

-For 4 motors 19 $ each = 76 $

to add shipping cost, paypal payments.

I'm in Italy.

Thanks for all. 

Email to modenetto@gmail.com

UPDATE MOTORS SOLD OUT

ONLY FRAME

Views: 444

▶ Reply to This

Replies to This Discussion

Permalink Reply by Paolo on May 2, 2012 at 4:34am
UPDATE
Motors are sold out, remains the frame.
Permalink Reply by Zen on May 2, 2012 at 10:29am

So this is a frame, pdb, and sonar mount? Ship to USA?

Permalink Reply by Paolo on May 2, 2012 at 1:00pm

Ty for reply

Yes it is so. 

Frame vs B, pdb already soldered and sonar mount free. I can ship to USA, say me if you wanna ordinary mail or courier (better from Italy..), tomorrow i will ask about shipping cost.

As i said in the post i'm waiting the nylon spacer (sincerly very poor quality) from a France dealer to be correct versus buyers to replace it into the legs where i have inserted alluminium spacer and self-locking nut, but for 1,68$ (DiYDrones n.6 ) you can buy these everywhere i suppose in USA, in Italy i've found only white color. If you wanna so strong the nylon spacer you have to wait sry.

Best regards

Permalink Reply by Zen on May 2, 2012 at 2:15pm
Yes I'm interested. I don't mind the alternative stronger spacers you have used. I will order any necessary parts from diy site. Please let me know how much shipping will be to zip code 43123. Thanks again for your time.
Permalink Reply by Paolo on May 5, 2012 at 6:04am

SOLD OUT

@Zen 

I realized that shipping charges are too high to send it in the U.S.,
it costs almost as new, so in the face of a request in Italy I decided
to move in this direction. Thank you for interested.

RSS

Social Networking

Top Content 

1 ArduPlane 2.73 released

ArduPlane 2.73 released
2 How to analyze a crash?

How to analyze a crash?
3 ArduVTOL

ArduVTOL
4 NEVER connect a Capacitor backup or voltage protector on APM board

NEVER connect a Capacitor backup or voltage protector on APM board
5 HD video for UAV's

HD video for UAV's
6 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
7 DIYDrones Chat Feature Info

DIYDrones Chat Feature Info
8 Arducopter Question

Arducopter Question
9 Arducopter 3Dr or Phantom

Arducopter 3Dr or Phantom
10 ArduVTOL - Wingcopter - Flight Report Nr.1

ArduVTOL - Wingcopter - Flight Report Nr.1

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service