[SOLD] Full Hexacopter Setup $300

Here is an awesome opportunity for somebody.


I have a full hexacopter setup that you can see in the below pic (Minus fpv gear and ardupilot 2560/gps). 6 NTM 910kv motors, 30A ESC's, Maxbotix Sonar, Mediatek GPS unit, Rusty's Rev-8 Frame, Rusty's CM-2 landing gear doubled up for strength, Rusty's floating plate setup, APC 12x3.8 props, 2 axis x468 gimbal with HXT-900 servos.

The copter will come with plenty of extras. Another NTM 910kv motor, about 15 extra booms in black and blue. Extra props, wires, screws, standoffs, chassis plates, etc. There is easily enough here to build 1-2 extra copters and I had enough there to fix it in case it needed it. There is also lots of extra flight controller parts.

$300. This is seriously a steal for this setup, and spare parts, which is completely flight ready and tuned. The only reason I am selling is that I think my interests are moving in a different direction. I intended to do professional photography with it but I do not have the time/money to follow-through with that venture.

Let me know via PM.

Views: 1159

▶ Reply to This

Replies to This Discussion

Permalink Reply by John Lauber on August 31, 2012 at 9:46pm
Where are u located? How will u ship this?

I'm Very interested...

John
Vaughn, WA USA
Permalink Reply by Juan Bergelund on September 1, 2012 at 9:27am
Very interested , how do i pay, it needs tobe ship toDallas, we can use my ups account

Let me know or feel free to call me 9724890728

Juan
Permalink Reply by james sowell on September 2, 2012 at 2:25am

pm sent

Permalink Reply by Juan Bergelund on September 2, 2012 at 10:16pm
Please help me, no pm on my inbox , do i need to look somewhere else
Permalink Reply by David Schwarz on September 2, 2012 at 9:46pm
Pm sent
Permalink Reply by Juan Bergelund on September 2, 2012 at 10:17pm
Please help me, no pm on my inbox , do i need to look somewhere else
Permalink Reply by james sowell on September 2, 2012 at 10:27pm
Permalink Reply by KernalPanic on September 3, 2012 at 9:25am
has this been sold ill buy it now... call me 4802000371
Permalink Reply by james sowell on September 2, 2012 at 10:29pm

look in friends

Permalink Reply by Randy Brazeau on September 3, 2012 at 12:32pm
Still for sale?
Permalink Reply by David Schwarz on September 4, 2012 at 8:09pm

Sent friend request. Any updates?

Permalink Reply by Mark Walsh on September 25, 2012 at 9:03pm

Looks great.

After a month, be sold by now I'd reckon.

Otherwise, let me know.

Mark

Australia.

RSS

Social Networking

Top Content 

1 APM Project vs DJI NAZA and WOOKONG

APM Project vs DJI NAZA and WOOKONG
2 APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)

APM 2.5 with NEO-6M ublox gps (not 3DR LEA-6)
3 APM Copter 2.9.1.b has been released

APM Copter 2.9.1.b has been released
4 Flying 3D Spline Curves between Waypoints with ArduCopter 3.0

Flying 3D Spline Curves between Waypoints with ArduCopter 3.0
5 ArduCopter-3.0 ready for wider use

ArduCopter-3.0 ready for wider use
6 10k autonomous flight - telemetry guided flight, and other APM tests!

10k autonomous flight - telemetry guided flight, and other APM tests!
7 Drone shot down by police

Drone shot down by police
8 MAAT final version is being tested

MAAT final version is being tested
9 Getting ready for Arducopter 3.0

Getting ready for Arducopter 3.0
10 Help Tuning Arduplane 2.73 With A Large Slow Airframe

Help Tuning Arduplane 2.73 With A Large Slow Airframe

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here. 

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service