Hi,

Is there a setting I can change so that my quad doesn't over compensate during flight and gain altitude? Tis happens especially when trying to fly backwards.
I'm running 2.0.38.

Thanks

Lee

Views: 75

Reply to This

Replies to This Discussion

Lateral motion will be converted to altitude when you straighten out. Is that your problem?
There is also a section of the code called throttle_boost that takes the pitch and roll and compensates the lack of downward thrust by increasing throttle. It uses the cos of both angles to increase the throttle. Maybe that could be disabled for a test.
Jason

I'll give that a try.  Thanks Jason!

Also, on a rotary wing aircraft, the rotors as they spin (in our case props) will generate additional lift as a wing would on a fixed wing aircraft during flight (forward, backward etc...)... How much depends on your velocity so it may or may not be a contributing factor. If so the best way to manage this IMO is on the sticks (throttle management).This is real obvious when you transition from forward flight to 'stopped', you will loose lift and begin to sink without more throttle.

RSS

Social Networking

Contests

Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.

A list of all T3 contests is here

Groups

Advertisement

© 2013   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service