Replies to This Discussion

DeveloperPermalink Reply by Michael Oborne on July 28, 2012 at 1:12am

in the dos box if you have it turn on.

• ▶ Reply

Permalink Reply by Andy on July 28, 2012 at 1:13am

so you mean in the Terminal Window?

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on July 28, 2012 at 1:18am

depending on which one you mean. goto help > console window, reboot the planner. and you will see the one i mean

• ▶ Reply

Permalink Reply by Andy on July 28, 2012 at 1:31am

nicccceeeee!!!

Thx a lot now I can transmit the messages from my aircraft to the ground!

Next step get the MissionPlaner working in MS C# Express 2008 hope it does work with this older version....

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on July 28, 2012 at 1:33am

tip for you

if you print raw text to the serial port

you can connect to 127.0.0.1:2300 using putty or similar and you should see the data.

• ▶ Reply

Permalink Reply by Andy on July 28, 2012 at 1:39am

WOW thats even nicer since it is more cleaner!!!!

Sadly Express 2008 does not work...

• ▶ Reply

Permalink Reply by Andy on July 28, 2012 at 2:26am

Is there no short description how to set up C# 2010 Express with all the libs needed? 

• ▶ Reply

DeveloperPermalink Reply by Michael Oborne on July 28, 2012 at 3:07am

install 2010 express
open project from git
goto properties
set refrence path to existing planner install.

working

• ▶ Reply

Permalink Reply by Andy on July 28, 2012 at 11:00am

hmm thx however still got an error with the first line with:

(in the Program.cs file)

Application.Run(new MainV2());    there is something wrong with the directX.

Do you know something about that...

• ▶ Reply